Partnering with leading Fiber Optical manufacturers Reflex Photonics and Amphenol, MATEC Electronics provides rugged embedded transceivers for harsh environment interconnect to be used in various Military, Aerospace and Industiral applications. Our Optical Interconnect Product portfolio can be grouped under 5 main categories:
|
Embedded Transceivers Our chip-sized embedded transceiversare based on 850 nm VCSELand offers bandwidth up to 300 Gbps for short distance applications(<300 m). The transceivers can be soldered or socketed to a printed circuit board and are well suited for small, compact systems requiring high I/O density, low power, and smallspace.Many of these transceivers have been qualified to operate in harsh environments, such as the ones found in space, and aerospace and defense applications. SpaceABLE SL and SM: Space Grade Full Duplex from 50G upto 300G LightABLE: Full Duplex from 50G upto 300G LightVISION: MPO interface 2 - 12 channels , 12.5G per lane SNAP12: 12 independent lanes with 120G data rate |
|
|
VPX Optical Interconnects Our blind mate fiber optics consists of a module connector with an integrated optical transceiver and a backplane connector. These products require no cables on the module and saves board space due to integration of the transceiver into the module connector. The module connector attaches to the board with an LGA connector which allows the boards to be provisioned with optics as required. Space Conex: Space Grade Full Duplex from 50G to 150G Light Conex: Full Duplex from 50G to 150G |
|
|
Optical FMC Boards The VITA 57.1/57.4 compliant LightABLE Optical FMC Board offers 150 Gbps of full-duplex bandwidth data communication and can be used with all the FPGA front end processing boards.
|
|
LEAP® On-Board Transceiver
300 Gb/s Leap®High-Speed Optical Module is faster, smaller, and more cost and power efficient than most conventional datacenter interconnects.
-Capable of speeds up to 25 Gb/s and distances up to 100m
-300 Gb/s total throughput requires only 1 sq in of board space and 5.4W of power
-Optical cable can be routed above or around other components in the design
|
|
|
Small Form-Factor Pluggable Transcievers We are able to offer you a wide range of optical transceiver product solution from 155M data rate to 100G form factor. Serving mainly in Data Centers, Wireless Communication and Transportation Markets.
100G QSFP28: Including SR4, CWDM4, LR4 and ER4 lite – LC or MPO interface 100G CFP/CFP2/CFP4 40G QSFP+:150m/400m SR4, 2km/10km/30km LR4 – LC or MPO interface 25G SFP28: 25G SR, LR 10G SFP+ /XFP: SR LR ER ZR, CW DM/DWDM, BIDI series. SFP: 155M/1.25G/2.5G/4G SR LR ER ZR, CWDM/ DWDM, BIDI series Active Optical Cables: 10GbE SFP, 40GbE QSFP+, 100GbE QSFP28 |
|
 |
QEPT® On-Board Transceiver HIGH PERFORMANCE UNDER EXTREME CONDITIONS, the Amphenol AOP 28Gbps extended temperature "Quad Embedded Pluggable Transceiver” is designed for highly challenging applications where both reliability and performance are critical. QEPT 4-TRX 100G NRZ
-Capable of speeds up to 28Gbps at distances up to 70m for the full extended temperature range.
-Aggregate 100Gbps over 4 channels on an efficient footprint.
-Optically and electrically pluggable.
-Operating Case Temperature: -40°C to +85°C.
-Upgradable to QEPT 200G PAM4 using the same foot print.
|
|
 |
SCFF On-Board Transceiver The rugged SCFF ("Small Cubical Form Factor") is a 1-channel duplex multi-mode (850nm) on-board transceiver with a 12pin electrical interface (SMT) complying specification SFF-8431 for high speed interfaces.
The rugged SCFF is mounted on a PCB using two screws and is solder-mount on the rear connector. Its height has been optimized to be lower than 10mm above the PCB to fit the state-of-the art electronic casings.
SCFF 1-TRX 10G ve 25G NRZ -Data rate transparent from 1.25Gbps to 28.05Gbps*
-Duplex LC optical interface
-SFF-8472 compliant two-wire control and diagnostic interface
-Enhanced Bit Error Rate (1e-12) requires no or limited FEC
-Programmable input equalization
-Programmable output amplitude and de-emphasis
-Clock and Data Recovery*
-High link-budget (14dB nominal at 10 Gbps)
|
Please get in touch with us for further technical information and assistance to select the most suitable fiber optical transceiver in accordance with your project requirements.
